Analysis of a UWB Planar Antenna with Split Ring Resonator

Authors

  • Otávio Paulino Lavor Federal Rural University of the Seimiarid
  • Carlos Gomes de Moura Federal University of Rio Grande do Norte
  • Humberto Cesar Chaves Fernandes Federal University of Rio Grande do Norte
  • Marinaldo Pinheiro Sousa Neto Federal Institute of Education, Science and Technology of the Rio Grande do Norte

DOI:

https://doi.org/10.14209/jcis.2015.4

Abstract

In this work a new configuration of a ultrawideband (UWB) microstrip antenna is analyzed. A Split Ring Resonator (SRR) is inserted into a circular opening on the opposite side of the patch. The SRR structure will work as a band stop filter. Three configurations are discussed and one of these configurations has a bandwidth from 3.2 to 10.6 GHz and notching a frequency band between 5.3 to 6.0 GHz. The prototype is built and results measured and simulated are compared.

Downloads

Download data is not yet available.

Author Biographies

Otávio Paulino Lavor, Federal Rural University of the Seimiarid

Campus Pau dos Ferros

Carlos Gomes de Moura, Federal University of Rio Grande do Norte

Department of Electrical Enginering

Humberto Cesar Chaves Fernandes, Federal University of Rio Grande do Norte

Department of Electrical Enginering

Marinaldo Pinheiro Sousa Neto, Federal Institute of Education, Science and Technology of the Rio Grande do Norte

Campus Mossoró

Downloads

Published

2015-05-14

How to Cite

Lavor, O. P., de Moura, C. G., Fernandes, H. C. C., & Sousa Neto, M. P. (2015). Analysis of a UWB Planar Antenna with Split Ring Resonator. Journal of Communication and Information Systems, 30(1). https://doi.org/10.14209/jcis.2015.4

Issue

Vol. 30 No. 1 (2015)

Section

Regular Papers

License

Authors who publish in this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a CC BY-NC 4.0 (Attribution-NonCommercial 4.0 International) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

___________

Received 2015-01-18
Accepted 2015-05-04
Published 2015-05-14