A New Ultraminiaturized Low-profile and Stable FSS with 2.5D Structure for 900 MHz ISM Band

Authors

  • Mychael Jales Duarte
  • Adaildo Gomes D'Assunção Júnior
  • Valdemir Praxedes da Silva Neto UFRN
  • Adaildo Gomes d'Assunção

DOI:

https://doi.org/10.14209/jcis.2023.2

Abstract

This paper presents a new 2.5D ultraminiaturized frequency selective surface (FSS) structure to operate in the 900 MHz ISM band (902 to 928 MHz), for application in the Wi-Fi HaLow. The proposed FSS simulation and design are performed using ANSYS HFSS software and equivalent circuit model (ECM). The development of the proposed 2.5D FSS is based on meander-line-based conducting patches and has required the simulation and design of typical (2D) and 2.5D structures. An equivalent circuit model was proposed and presented very accurate results. For comparison purpose, a prototype is fabricated and measured. Agreement is observed between simulation and measurement results.

Downloads

Download data is not yet available.

Downloads

Published

2023-02-01

How to Cite

Duarte, M. J., D’Assunção Júnior, A. G., Silva Neto, V. P. da, & d’Assunção, A. G. (2023). A New Ultraminiaturized Low-profile and Stable FSS with 2.5D Structure for 900 MHz ISM Band. Journal of Communication and Information Systems, 38(1), 9–13. https://doi.org/10.14209/jcis.2023.2

Issue

Vol. 38 No. 1 (2023)

Section

Letters

License

Authors who publish in this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a CC BY-NC 4.0 (Attribution-NonCommercial 4.0 International) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

___________

Received 2022-02-17
Accepted 2022-11-22
Published 2023-02-01